When I was a new knitter my first big yarn purchase from a proper yarn store was 6 skeins of Brown Sheep Burly Spun for a bulky knitted jacket. The yarn store owner ordered the yarn for me and when it came in I paid a shocking (to me) amount of money for it. That’s where the problems started. I swatched (see, I can learn!) with several different needles, but couldn’t get gauge. So the yarn languished in my stash. Looking back I wonder why I thought I would need a bulky wool jacket in the warm climate of the Southeastern US. Clearly I didn’t think it all the way through.
Last November I bought a 15″ Cricket loom. I’ve been on a little bit of a weaving jag since then, and I am having so much fun learning what I can (and can’t) do with this piece of equipment. I don’t have a sewing machine or a serger, and I’ve read that handwoven fabric is not as stable as commercial fabric, so I’m reluctant to cut into my fabric, but I still want to make wearable garments with it. So I set out to determine what kinds of garments can be made with squares and rectangles. Number 1 on the list is a vest. The vest can be long or short, but since it’s made of uncut rectangles it will end up blocky.
Recently I’ve been trying to use my stash instead of always buying new yarn . I mean, that’s what stash is for, right? (Note that I have not stopped buying new yarn, I’m just trying to also use some of the yarn I already have) I unearthed my Burly Spun and had a thought: if I used a fingering weight yarn in the warp (vertical) and sett it pretty wide, then I could use this Super Bulky in the weft (horizontal) and end up with a fabric that would (hopefully) not give me heat stroke. I did some measuring and some math, and found 2 fingering weight yarns (red and white) in my stash that coordinated well with my main yarn, then I warped up my loom and started weaving. I’m pleased to say that everything I used in this garment came from stash.
How I constructed the garment:
- A Ruana is a fancy name for a long vest. I took my measurements and wove 2 back pieces and 2 front pieces. The red warp yarn blended in extremely well with my weft yarn, so the woven fabric almost looks like brick.
- I used mattress stitch to sew the side seams, leaving slits for the arm holes and vents below the waist.
- I sewed lace along the outside top edges, turned it to the inside for a clean seam line, then sewed the shoulder seams at a similar angle to the slope of my shoulders.
- Using my red warp yarn I picked up stitches along the fronts and neck and knit a garter stitch collar using short rows to shape the bottom edges. I also picked up stitches along the side vents and armholes and knit a 3-row garter stitch edging to stabilize and clean up the edges. Conveniently my knitted stitch gauge was the same as my woven row gauge.
What I learned from this weave:
- If you use a fine yarn in the warp and a big yarn in the weft your fabric turns out super interesting and textured. I must do this more!
- Weaving with super bulky yarn goes incredibly fast! Talk about instant gratification!
- The finishing on a sewing project can take as long as weaving the fabric and doing the basic construction (I hate the finishing work).
- Projects only get done if you work on them. I started this project in November, and after the first panel was completed inexplicably stopped until mid-June. Maybe I didn’t want to deal with warping my loom?
- When weaving multiple panels of the same width, weave them all on the same warp if possible. This eliminates time spent warping and helps with loom waste.
I love this time of year. The thrill of Autumn is in the air and the leaves are slowly starting to change colours and fall. The days are beginning to be cooler, making this the most lovely time of year to be outdoors. I love Fall. Fall is when I can start to wear all the beautiful woolens I’ve knit throughout the year. I get to pull scarves and shawls and hats out that may not have been used since last winter. Fall is a time for layering and for earth tones and warm things to drink. In Fall I can enjoy the nip in the air without longing for it to be warm again.
I’ve a colorwork hat in the works that is so very Fallish. I can’t wait for it to be off my needles so I can wear it. I’m using handspun from the first time I spun Batts. They were little tiny things made of Merino, Alpaca, and Bamboo, and I had no idea how to spin them.
This may have been my first attempt at woolen spinning, but by the end I was just spinning worsted. The yarn is a 2-ply sport-weight(ish) and is very soft. My contrast yarn is a light fingering weight yarn from Hedgehog Fibers that I bought on my honeymoon. Fingering weight on it’s own wouldn’t stand up well to the sport-weight handspun, so I’m holding it doubled for the most lovely Marl. Really, I can’t tell you how beautiful this is!
I’m making the pattern up as I go, but for the colorwork section I modified a chart from a book the owner of my LYS gave me for my anniversary (Thanks, Krista!!). And last, but not least, I am using Jane Austen stitch markers. This project is just so perfect in so many ways. I can’t wait to see how it comes out! Hopefully you’ll see a new pattern coming soon. Watch this space!
5 years is a long time. 5 years ago I had just graduated from college and gone on a trip to Europe: I was broke. It wasn’t a great time for jobs, so I was working part time and sharing a 1-bedroom apartment with 2 other girls (my “bedroom” was actually the dining room and my “door” was a curtain).
I was a new knitter, so I barely knew what I was doing and had no idea what good yarn was. But I was passionate about knitting, so I made do with what I had and somehow not everything I knit during that period was crap. I had found Ravelry by this time and I adored Tin Can Knits (I still adore them. They’re fabulous!). It was Christmas time, so I bought their Sitka Spruce hat pattern and some KnitPicks yarn (Wool of the Andes Superwash) and began to knit (note that I did not swatch).
I had trouble with the pattern – not because it wasn’t a good pattern (Tin Can Knits patterns are awesome), but because I was a new knitter and I was still figuring the whole knitting thing out. By hook or by crook I finished the hat and then realized it was too big. It probably would have fit a giant perfectly. I stuck it in the washer and dryer and hoped it would shrink some…no dice. So I threw it in the bottom of my stash and started something else. I was really sad though. I had spent so much time (and a decent amount of money to me at the time) on this hat, only to have it not fit. I knew it was my fault because I wouldn’t take the time to swatch…but it still hurt, and from time to time it niggled at my brain.
I did a few google searches and found out that I could sew elastic thread inside the brim to tighten it up, so I bought some elastic thread and set to with gusto. I got halfway through hat surgery and tried it on to see how I was doing, only to find that now my beautiful hat was too small. The Horror! The Irony! The knitting goddess was really trying to beat this lesson into me: For the love of wool, swatch before you start! (For the record, I swatch pretty religiously now. I still dislike it.) I threw the hat and elastic back in the stash and there it has stayed for the last 4 1/2 years.
Today I pulled the hat out and found the elastic, determined to fix the darn hat once and for all. First I loosened the elastic I had already sewn in, then I sewed elastic into the rest of the brim. 30 minutes was all it took. Why did it take me 5 years to do 30 minutes’ work? Next time I need to amend my knitting remind me of the 5 year hat.
Last time we talked I was beavering away on my entrelac scarf. I kept it in my bag to knit on while waiting and on trips and in meetings (the kind where I join online and no one can see me. Alas, I have too many in-person meetings). Once I understood the basics of how entrelac works it was easy to pick up for a few minutes here and there. It’s just stockinette with the occasional decrease. It turns out that if you work on something consistently (even if consistently just means a half hour a few times a week) it eventually gets done. I’m pleased to show you my finished scarf.
I handspun the yarn over a year ago. My goal was fat singles, but the end yarn was a little more thick and thin than I really like, but there’s a kind of perfection in the imperfection, right? I can’t wait to wear this with a jean jacket this fall.