My mom sewed a lot for me when I was a kid. She made me all sorts of lovely dresses and skirts, especially sundresses until I stopped wearing them in favor of pants around age 12. I don’t remember if she ever made me a pinafore as such, but I remember reading about them, and my sundresses certainly served the same purpose.
Recently as I was scrolling through Instagram I came across the Fleur Pinafore by Untitled Thoughts. I was entranced. But then I kept scrolling, because I don’t wear pinafores, and I haven’t since I was 12 at most. But then it kept popping up on my feed. And then I followed the hashtag. And then I found myself at the fabric store shopping for supplies to make myself a pinafore.
I bought this beautiful softly woven cotton fabric from Hobby Lobby. It’s somewhat more loosely woven than quilting cotton, which makes it drape nicely, and the colours and pattern remind me of my childhood in Arizona. I also bought some plain deep red cotton as an accent/lining fabric.
Now I am a very creative person. I’ve written knitting and tatting patterns, and I’ve drafted one or two very simple sewing patterns for myself. So when I looked at the Fleur Pinafore, I thought about how it’s pretty much just rectangles, and I decided to take my measurements and draft my own pattern. And doing that turned out pretty well, but I definitely feel that if I had bought and followed the pattern this would have taken me less time and my finished product would have turned out a little nicer. As it is, though, I’m pretty happy with what I made.
The first thing I did was to measure myself and my fabric and have a good think. I even made a little sketch! I wanted to be extra fancy with the front “bodice” block of the pinafore, so I cut and stitched this first.
Then I cut my lining fabric. I had originally planned to do my pockets, waistband, and lining all in the same wine red fabric, but it turned out that I didn’t buy quite enough. So my waistband and the front and back blocks were lined with an eggplant purple linen/rayon blend that was left over from another project. Before sewing the fashion fabric to the lining, I made up the straps so I could stitch these in with the seam. Once the front and back blocks were assembled, I turned them right side out, clipped the corners, ironed everything, and top-stitched around the edges. With this the bodice front and back were done.
The next piece I worked on was the waistband. I cut the waistband straight, as a rectangle, but with hindsight I wish I had cut it on a slight curve like a pants or skirt waistband. The red fabric originally meant for lining was cut as the outer waistband, and had interfacing fused on. Then the waistband outer and lining were centered over the bottom edge of the bodice blocks, and seamed.
The final piece to assemble was the skirt. I found that if I folded my remaining fabric in half it was the perfect length, so I cut it into 2 equal pieces along the fold line, and sewed 3 rows of basting stitches along the top of each skirt panel. Before gathering the skirt panels, I sewed them together, leaving a 5″ opening at the top of each seam. I inserted a placket into both openings, but instead of attaching both sides of the placket to the skirt, I attached one side of each placket to my pockets. The pockets had not been seamed yet, so I sewed the second half of each pocket to the second skirt panel, and then sewed the pockets together. This is hard to describe, and even harder to visualize, but it left me with a pocket and a skirt opening in the same place.
At this point I was running out of daylight, so I did a quick single-turn hem, and went to bed. The next morning I was wild to wear my new pinafore, so instead of waiting to sewing in closures I pinned it on and went about my day. This wasn’t part of the plan, but I am so glad I wore this around for a day before adding closures! It turns out that my sitting down waist measurement is about 2 inches larger than my standing up waist measurement, and I had not accounted for this in my pattern drafting. Wearing the pinafore pinned closed for a few hours helped me to figure out where the closures needed to be so I would end up with a garment I would actually enjoy wearing.
The last adjustment that needed to be made was to the hem. I cut the skirt as 2 equal rectangles, not taking into account the difference in waist-to-hem measurements in the front and back. The proper technique to fix this is to take out the waist seam and raise the waist to the right measurement, but I had already established that I was not taking the waist seam out. Instead, I cut the front panel to be an inch shorter in the front, angling to match the back panel at the side seams.
My pinafore is technically still not done. I still have a single-turn hem, and I need to do some finishing work on the pocket edges, but it is wearable, and I have loved wearing it this month!
P.S. This garment is massively cat approved! My black cat normally refuses to sit in laps, but the first day I wore this pinafore he volunteered to be a lap kitty. This dress is magic!
4 thoughts on “I thought my pinafore days were over”
This is so pretty! I am wanted to do more sewing fir myself, but who has the time? Lol! How did you learn to draft patterns? I’m wanted to focus on that aspect of sewing.
Thanks, Friend! I have a lot to learn about pattern drafting, but what I have learned has been from watching videos on YouTube and experimenting with fitting existing patterns to my body. It was very freeing to realize that making changes to a pattern wouldn’t cause the whole garment to blow up in my face. Using less expensive fabrics to make a mock-up or even a wearable toile also helps with peace of mind, especially if I bought a more expensive fabric for my final garment. This is one area where you learn by doing.