When I was growing up Pocahontas was my favourite Disney princess. It seems she made a lasting impression on me, because a while ago I bought a few yards of this viscose blend jersey to make a dress.
My pattern was New Look A6122, and I used view A.
After washing my fabrics, I laid everything out and cut it, doing my best to keep my fabrics on the straight of grain. It’s hard enough to cut on the straight of grain with a more stable knit like I used in my basic t-shirt recently, but this viscose blend was all kinds of shifty! As mentioned before, my sewing machine won’t do a zig-zag stitch right now, which would have been the best way to sew this dress up. I used a twin needle instead since the zig-zagging bobbin thread allows seams sewn this way to have a small amount of stretch. It’s not a perfect solution, but it’s better than a normal straight stitch.
I worked up the bodice, then tried it on for a fitting before attaching the skirt. It’s a good thing I did this, because I ended up taking 6 inches of width out of the top of the neckline, raising the bottom edge of the bodice, and removing the lower bust darts. With that done, I reattached the armsceye and waist pieces, and started work on the skirt. The pattern instructs you to make gathers with the extra fabric in both front and back, but I didn’t want to create any more bulk around my midsection. Instead I put two pleats in the front and back pieces – much more slimming.
I sewed the front pieces and the back pieces together, then sewed up the side seams. Then I attached the straps to the back piece by hand in an effort to keep the garment outer as clean and seamless as possible. I let the dress hang before hemming it. I was afraid the slippery, stretchy fabric might grow in length with time. Once it had hung on my dress form for a day or so I cut the hem, and hemmed it.
This dress is very fun to wear! It is swooshy and feels so flattering! Every time I wear it I start singing the Pocahontas sound track! I would absolutely consider making another one, however there are some changes I would make: the waist and armscye pieces are interfaced with fusible interfacing. As you can see, the outer layer is pulling away from the interfacing in places, leading to a messy looking front. This is mainly caused by the fabric being so much stretchier than the stretch interfacing. If I did this again I would choose a fabric with much less stretch for the interfaced pieces, maybe a 100% cotton knit, and depending on the strength of that fabric I might skip the interfacing altogether. If I made this again, I would do the majority of the stitching with a zig zag stitch, possibly supplemented by some top-stitching. The twin needle works well enough, but it’s not quite stretchy enough for this fabric. Ah, the fabric. If I made this again, I would probably go for a less stretchy/slinky fabric. It’s so fun to wear, but so hard to sew!
Dramatic Lyric 