I have been obsessing over the Coquelicot Skirt by Wildflower designs since before the pattern was available. I waited for months as they posted teaser images. I knew this was the perfect garment for me. The pattern was published several months ago, but for some reason it’s taken me quite a while to get around to making it. But at long last the time has come. The Coquelicot skirt will be mine!
Each sewing project starts with pattern and fabric choices. The pattern suggests using very drapey fabrics for maximum swish factor, but I decided to go in a different direction: I wanted a quilted skirt. Last winter (Winter of 2020/2021) I saw the most beautiful quilted floral fabric at JoAnn’s. I kept convincing myself not to buy it because I didn’t have a project for it, and then when warmer weather came back it was taken off the shelves. I thought it was gone forever, and I was very sad. Then early this winter I saw it again! This time I wouldn’t let it pass me by. I bought 1 1/2 yards (I think?) along with a similar amount of a coordinating quilting cotton and started planning my garment.
I cut the main skirt panels out of the quilted fabric, and everything else out of the plain cotton. You can see in the photo above that I had several options for my seam finishes. I started by binding the pocket slit with 1″ bias made from a light batiste (it’s the same batiste I used for my 1920s slip). I then used the same batiste to finish the edges of the quilted panels using a Hong Kong finish. Then I seamed up the back panels (the front was cut on the fold). You’re supposed to sew the seams and then apply the Hong Kong binding, but these quilted pieces were heavy, and I didn’t want to wrangle them any more than I had to.
With the pocket slits finished I sewed the pockets onto the back skirt panel with the raw edges facing in, then overcast the raw edges. I should have bound this edge with batiste, but I forgot until the pocket was already sewn up. The pocket itself is bound with a remnant of tan bias I had from another project.
I then created the front and back waistbands and the lacing panel. I didn’t interface any of these pieces, since the quilting cotton is stiff enough on its own. I let the garment hang overnight just in case it decided to stretch out (it didn’t).
with all the pre-construction work out of the way, all that was left was to sew up the side seams and do the finishing. The hem is bound with bias made from the same fabric used for the waistband and pockets to provide additional continuity to the skirt.
With that the skirt was done! Hooray!
It is a lot of fun to wear, even though the heavy fabric made it a bit of a pain to make. It is quite warm when sitting down, although it stands out from the body when standing up, so it’s not especially warm when I am upright.
I made View A (half-circle skirt) with the waistband from View B. I do not recommend this, and especially not with heavy fabrics. The waist lines are drafted on very different curves, and that made it rather difficult to get the back waistband onto the skirt. But that is a problem stemming from my decisions, not from the pattern itself.
One change I would make (because there’s always at least one change I would make): I find that the internal lacing panel folds up on the right side when tension is put on it. This makes total sense since there is nothing keeping it flat. I would fix this by inserting a small bone just inside the lacing tape on just the right side.
Have you ever worked with quilted fabric? What is your favourite kind of garment to make?