How to Make Simple Sewing Pattern Weights

When I was a teenager my mom taught me how to sew. I always had the hardest time getting the pattern to line up with the straight of grain. I would lay it out, pin it, measure, unpin and adjust, measure again, etc. until the pattern piece was straight. Then the whole process was repeated for the next pattern piece. I hated the cutting process because it always seemed to take so much effort to get everything laid out properly.

After college once I was out on my own I started sewing again. For a while I used the pinning method, hating every second of it, then I read something online and realized I could weight my pattern pieces down instead of pinning them. The heavens opened at that moment, and the angels sang. My life would never be the same! Since that time I have been using a random assortment of items to weight my pattern pieces: books, figurines, my phone, an extra pair of scissors … you get the idea. It was frustrating to never have quite enough weights of the right size to hand. So in true DIY fashion, I decided to fix the problem.

In researching solutions to my weighty problem I found several blogs that used small ceramic tiles to make pattern weights. I went out to Home Depot and bought a package of hexagonal tiles (I like that they almost look like EPP shapes), then I bought a few sheets of cheap felt from Walmart. Some other materials I used that I already had were a hot glue gun, hot glue sticks, scissors, and chalk to mark the felt with. All told, I spent less than $20 on my project.

Step 1: Remove the tiles from the backing. I planned to cut through the mesh holding the tiles together, but they actually peeled off pretty easily. I used a pair of scissors to clean up any glue that marred the sides.

Step 2: Trace around the tiles onto felt, then cut the pieces out.

Step 3: Adhere the felt to the tiles. I put a circle of hot glue in the center of each tile to hold the felt in place, then glued down each side as close to the edge as I could manage.

Step 4: Clean up the edges. A quick snip on all sides leaves these pattern weights looking just about perfect.

My sister helped me make a dozen weights, and we spent about 20 minutes on the project. It was fun to make, and I’ve already started using them in my sewing projects. If you’re tired of pins, give pattern weights a try. They might just change your life!